KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override

KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override
KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override
KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override
KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override
KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override
KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override
KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override
KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override
KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override

KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override
Excellent Radio Tubular Motor with built in receiver, mechanic limits and manual override. 120V 60Hz, 50 NM 13 Rpm. Radio 3 wires with manual Overrides. Mechanical Limits, 1 adjustable limits stick. Motor diameter size 45 mm. Motor Length: 29 3/4 inches, 750 mm. It comes with 1 bracket, 1 Round crown and drive adapter 75 mm. 1 remote control of 1 channel. Lift Capacity: Round tube 78 mm 85 Kg / 224 Lbs. Awnings, Big Roller Shades, Roll up Shutters. Please make sure you know how to install the motor, consult with a professional and read all the instructions carefully. All Motors are fully tested before they leave our warehouse. Instructions on how to program the Kamir motors KM35R-6, KM35R13, KM45R-20, KM45R-50, KM45RM-50, KM45RMA-50, KM59R-100 and KM59RM-100 with manual limits. 1- Take off the back cover of the remote and place the battery. Make sure the battery on the remote control is good. You can verify that by pressing any of the front buttons and some light should be seen. 2- To engage the remote control. Connect the motor to a power supply; you will hear a long beep then. 3- In the back of the remote control there is a P2 button you are going to press it twice; every time you should hear a beep from the motor. 4- Then on the front of the remote control press the up or down button until you hear a long beep the motor is linked with your remote. 5- If you press the up or down buttons on the remote the motor should move. 6- If the direction is wrong, just disconnect the power supply from the motor wait 60 sec and power it back. Repeat steps 3 and 4 with the different direction than you did before. 7- You need to make sure the motor is correctly attached to the tube in order for the limits to work. After that you can set you limits with the plastic adjuster, make sure you do this manually. DO NOT USE A POWER TOOL TO DO IT. The item “KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override” is in sale since Thursday, August 11, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Garden Structures & Shade\Awnings & Canopies”. The seller is “kamirblinds” and is located in Hallandale, Florida. This item can be shipped to United States.
  • Modified Item: No
  • Custom Bundle: No
  • MPN: Does Not Apply
  • Brand: Kamir Motors
  • Non-Domestic Product: No

KM45RMA Kamir Tubular Motors for Awnings and Rollup Shutter 50 Nm Radio Override
January 11, 2019