https://patioawningscanopiesandtents.com Mon, 21 Sep 2026 08:46:41 +0000 en-US hourly 1 https://patioawningscanopiesandtents.com/2024/10/10-x-20-slope-lean-to-canopy-fittings-kits-diy-metal-carport-frame-parts/ https://patioawningscanopiesandtents.com/2024/10/10-x-20-slope-lean-to-canopy-fittings-kits-diy-metal-carport-frame-parts/#comments Wed, 30 Oct 2024 09:22:53 +0000 https://patioawningscanopiesandtents.com/2024/10/10-x-20-slope-lean-to-canopy-fittings-kits-diy-metal-carport-frame-parts/








Poles are not included with DIY Canopy Fittings Kits. A Cowboy Canopy 10′ x 20′ Slope Kit uses 17 EMT poles in size 1. Slope, Lean-To Canopy Parts Kits can be used for many different purposes such as DIY carports for RV’s, boats, cars, jet skis and motorcycles. Livestock, horse and dog shelters. Shade shelters for outdoor dining, picnics and tailgating. Party tents for outdoor events, festivals, farmer’s markets, swap meets and flea markets. Greenhouses and sheds for outdoor workshops, storage and more. Cowboy Canopy uses only premium quality EMT Canopy Fittings. They are made of galvanized steel and are rust resistant. The eye bolts have 360-degree welds. These Fittings are built to last decades. All Fittings have eye bolts which simplify assembly. Simply use the eye bolts to hand tighten your poles to your Fittings. Unscrew to take down. Construct your DIY Canopy with no drills, screwdrivers or advanced skills in construction required. Slope Canopy Kits can be customized to a specific size to fit your needs. The slope angle is 102-degrees, which means there are 2.5 of rise for every foot of run of your roof. Knowing this information allows you to modify your pole lengths. However, this can be changed. For example, a 10′ x 10′ kit can be custom fit to 8′ x 8′, or 6′ x 8′, etc. The Slope roof pitch (102 degrees) is NOT recommended for snow. The pitch is not steep enough to allow shedding of snow. Heavy snow loads resting on your Canopy’s roof may cause damage to your Canopy poles, Fittings and surrounding properties. If you live in an area that snows, use a High Peak Canopy instead. The High Peak roof pitch (120 degrees) will prevent excessive snow accumulation. Acts of Nature: Cowboy Canopy is not responsible for Canopies or property damaged due to acts of nature. This includes snow, rain, wind, floods, severe storms, or any other naturally occurring event. It is the customer’s responsibility to use discretion during periods of severe weather, and take the necessary steps to ensure damage is not caused to the canopy or surrounding property. Securely welded joints, 360-degree welds around eye bolts, and thick 16-gauge steel. Rust resistant, galvanized steel finish. Eye bolts make assembly fast and easy with no tools required. Build sturdy carports and shelters that are also affordable. Cowboy Canopy Fittings Kits do NOT include the canopy poles. This 10′ x 20′ Slope Fittings Kit uses 17 EMT conduit poles in size 1 diameter. 10′ x 20′ Slope Roof Fittings. A 10′ x 20′ Slope Kit includes 2 FP3J Fittings. A 10′ x 20′ Slope Kit includes 2 FP3JSL Fittings. A 10′ x 20′ Slope Kit includes 1 FP41 Fitting. A 10′ x 20′ Slope Kit includes 1 FP41SL Fitting. Foot Pads and Side Wall Fittings. A 10′ x 20′ Slope Kit includes 6 Foot Pads. A 10′ x 20′ Slope Kit includes 4 FOL Side Wall Fittings. A 10′ x 20′ Slope Kit includes 2 FOT Side Wall Fittings. The inner diameter of a 1″ Canopy Fitting is 1.255″. 1″ Fittings pair with 1″ EMT conduit. 10′ x 20′ Slope Canopy Dimensions and Parts. 6 Roof Fittings (FP3J, FP41, FP3JSL and FP41SL). 6 Side Wall Fittings (FOL and FOT). IMPORTANT: Canopy Kits include the FITTINGS ONLY. The poles are NOT included. This kit uses 1 EMT. 17 EMT Poles are needed to build a 10′ x 20′ Slope Canopy. 10′ Poles – 14. 8′ Poles – 3 (Cut 3 poles to 8′ lengths for the canopy’s shorter legs). 10′ x 20. 9.8’W x 20L. 1″ (1″ Fittings pair with 1 EMT). Measurements can be customized to fit your needs by adjusting the lengths of your poles. A slope roof has a 102-degree angle with 2.5 of rise per foot of run.

]]> https://patioawningscanopiesandtents.com/2024/10/10-x-20-slope-lean-to-canopy-fittings-kits-diy-metal-carport-frame-parts/feed/ 0 https://patioawningscanopiesandtents.com/2020/09/greenhouse-kit-34-or-1-or-1-12-low-peak-slope-flat-canopy-10x1020304050/ https://patioawningscanopiesandtents.com/2020/09/greenhouse-kit-34-or-1-or-1-12-low-peak-slope-flat-canopy-10x1020304050/#comments Sat, 19 Sep 2020 13:01:09 +0000 http://patioawningscanopiesandtents.com/2020/09/greenhouse-kit-34-or-1-or-1-12-low-peak-slope-flat-canopy-10x1020304050/












Pictures are used just for reference. This Canopy Parts Kit includes FITTINGS only. The conduit frame piping is NOT included. Este kit de piezas Canopy inluye solo GUARNICIONES. La tuberia del marco del conducto NO esta incluida. C j gài língjiàn tàojiàn jn bokuò pèijiàn. Bù bokuò dogun jià gundào. B ph tùng tán này ch bao gm PH KIN. Không bao gm các ng ng khung ng dn. EMT comes standard in 10′ lengths and can occasionally be sourced in 20′ lengths. 3/4″ Fittings use size 3/4″ EMT Pipe. 1″ Fittings use size 1″ EMT Pipe. 1-1/2″ Fittings use size 1-1/4″ EMT Pipe. Canopy fittings may vary in color being silver and/or gold mixed due to inventory availability. Low Peak and Low Slope angles are 2.5 rise per foot. Do-It-Yourself Canopy Parts Kits are useful for a variety purposes. The most common are greenhouses and carports for; RVs, boats, cars, trucks, motorcycles, jet skis, and other outdoor equipment. They also make great shelters for outdoor workshops, awnings, shade structures for porches, patios, kids’ play areas, and vendor booths. Canopy Parts Kits are user friendly and affordable. They are high quality yet don’t require you to spend thousands of dollars or hire a contractor. Constructed of galvanized steel, the parts require no maintenance, will not rust or be subject to termites, mold and rot that affect wooden structures. They do not require specialized equipment or advanced construction skills to assemble. The pre-made canopy fittings have slip-fit/eye bolt connections to make installation quick and easy. Design to suit your needs and space. You can even modify it should your needs change in the future. They can be used for temporary, semi-permanent, or permanent purposes. Canopy Parts Kits come complete with all roof fittings. A selection of different roof styles are available; flat, slope, high peak and low peak (not all roof styles are available for each fitting size). Foot Pad fittings and Side Wall fittings are available Ugrade Options. Foot Pads – For temporary, semi-permanent and permanent structures, Foot Pads provide stabilization and ground anchor points for your Canopy Structure. The base of each Foot Pad fitting has three holes pre-drilled allowing Anchor Nails (see our other listings) or hardware of your choice to be used to secure your structure to the ground. Side Walls – Add either One or Two Side Walls. The Side Wall upgrade not only ties your canopy structure legs together for added horizontal strength, but will also provide an attachment point to fixate side covers. For greenhouses, Side Walls can also be used for trellising. For vendor booths, Side Walls can be used at any height to hang display items and banners. Customizing EMT poles to any length is easy. To shorten the length of your EMT tubing, you can use a simple and safe device called a pipe cutter, a hacksaw, or an electric grinder. If you are wanting to build your canopy taller than 10′ or add two EMT conduit pieces together, we sell 3/4″, 1″ and 1-1/2 union coupler connectors (see our other listings – part FC). Easily build any size shelter you can imagine. The kits are listed in 10′ increments but keep in mind that many variations of canopy sizes are possible using the same parts. Likewise, a 10′ x 16′ or 10′ x 18′ will use the same amount of canopy parts as a 10′ x 20′. A 10′ x 24′, 10′ x 26′, or 10′ x 28′ will use the same amount of parts as a 10′ x 30′, and so on. There are many other denominations of canopy sizes not listed that you can consider. Instructions for assembly are included with all Canopy Kits. Make sure to see our other listings too! Below are the part quantities you will receive based on your custom order. Flat and Slope 10’x10′ configurations come with 4 roof pieces and the upgrade option of 4 foot pads and the upgrade option of one side wall (2 fittings) or two side walls (4 fittings). Low Peak 10’x10′ configurations come with 6 roof pieces and the upgrade option of 4 foot pads and the upgrade option of one side wall (2 fittings) or two side walls (4 fittings). Flat and Slope 10’x20′ configurations come with 6 roof pieces and the upgrade option of 6 foot pads and the upgrade option of one side wall (3 fittings) or two side walls (6 fittings). Low Peak 10’x20′ configurations come with 9 roof pieces and the upgrade option of 6 foot pads and the upgrade option of one side wall (3 fittings) or two side walls (6 fittings). Flat and Slope 10’x30′ configurations come with 8 roof pieces and the upgrade option of 8 foot pads and the upgrade option of one side wall (4 fittings) or two side walls (8 fittings). Low Peak 10’x30′ configurations come with 12 roof pieces and the upgrade option of 8 foot pads and the upgrade option of one side wall (4 fittings) or two side walls (8 fittings). Flat and Slope 10’x40′ configurations come with 10 roof pieces and the upgrade option of 10 foot pads and the upgrade option of one side wall (5 fittings) or two side walls (10 fittings). Low Peak 10’x40′ configurations come with 15 roof pieces and the upgrade option of 10 foot pads and the upgrade option of one side wall (5 fittings) or two side walls (10 fittings). Flat and Slope 10’x50′ configurations come with 12 roof pieces and the upgrade option of 12 foot pads and the upgrade option of one side wall (6 fittings) or two side walls (12 fittings). Low Peak 10’x50′ configurations come with 18 roof pieces and the upgrade option of 12 foot pads and the upgrade option of one side wall (6 fittings) or two side walls (12 fittings). The item “Greenhouse Kit 3/4 or 1 or 1-1/2 Low Peak, Slope, Flat Canopy 10×10/20/30/40/50″ is in sale since Thursday, February 13, 2020. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Garden Structures & Shade\Awnings & Canopies”. The seller is “sacramentocanopy” and is located in Sacramento, California. This item can be shipped to United States.

• Size: 10×20 ft
• Material: Metal
• California Prop 65 Warning: WARNING: California Proposition 65 Warning: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harms. Wash hands after handling the product. For more information go to https://www.p65warnings.ca.gov/
• Dimension: 10′ x 10’/20’/30’/40’/50′
• Type: Carport Canopy
• MPN: sacramentocanopy Sacramento Canopy
• Brand: sacramentocanopy.com

]]> https://patioawningscanopiesandtents.com/2020/09/greenhouse-kit-34-or-1-or-1-12-low-peak-slope-flat-canopy-10x1020304050/feed/ 0